VVDI2 Key Programmer
Item No.: AP02
VVDI2 Key Programmer Vcomes with Basic Function + VW + BMW + Porsche+PSA+ AUDI Generation 5 Function+BMW OBD Fucntion+BMW CAS4+ Functions +Tango + J2534, No Need to buy other Authorization.
VVDI2 Key Programmer Covers All the Functions of VVDI, VVDI 5th IMMO Adapter, BMW Multi Tool, CAS4 Adapter, Tango & J2534.
VVDI2 Key Programmer - BMW FEM/BDC System (function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info->programming FEM/BDC system->make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding
VVDI2 Key Programmer Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "BMW E-sys software" program FEM/BDC system.then programming FEM/BDC system with VVDI2-BMW
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.（FEM 95128 chip, BDC 95256 chip）usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BMW E-sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.
VVDI2 Key Programmer Special Function:
Including all VVDI functions, improved and more stable
More vehicle coverage, multi Immo functions
New added plug-in function and reserved connectors to include all VVDI functions
Xhorse VVDI2 add more vehicle models
VVDI2 Key Programmer supports diagnostic function only for VAG groups, But VVDI2 has achieved multi brand vehicle diagnosis and supports part of vehicle immo programming function and software online upgrade.
VVDI2 can replace lots of customized devices. Users do not need to purchase specific OBD tool for specific vehicle makes which will save you a lot.
VVDI2 Key Programmer can act as a multifunction programmer to connect plug-ins, and read & write IC and CPU data.
Can connect BMW plug to realize OBD function, And meanwhile reserve some connectors for further uses.
The core function is to detect the remote control frequency:
Automatically identify chip type
Support multi-function on VW vehicles
Read BMW ISN
Remote control programmer
J2534 Compatible Adapter
1.Detect key frequency, automatically identify chip type
The test result can show on the main unit display, no need to connect computer
2. Support VAG vehicle diagnostic function
Read & write Immo4/Immo5 system
Program BCM remote
K-Line instrument immobilizer box
Program control unit
Unlock Immo1/Immo2 firmware protection
Support data manipulation tools
3. Support OBD functions on BMW vehicles
4. Fix CAS4 EEPROM key programmer
Generate specialized chips
Immobilizer data processing tool
Other key tools
Generate remote control
5. Passthru J2534 Introduction
With built-in switch matrix, it supports third-party diagnostic software including:
ODIS, Toyota TIS techstream etc. To perform VVDI2 diagnostic function, third-party diagnostic software should be compatible with J2534 function.
VVDI2 Key Programmer Superiority:
VVDI technician has devoted themselves to VVDI free update online and update service in the pass five years. This is what VVDI has been widely respected and ranked as a power tool. There is no doubt that the more power and high-end configuration VVD2 will inherit the fine traditions.
Apart from free update online service and system optimization, more powerful functions and vehicle models (Like Porsche) will soon be available via update. And other more functions. VVDI2 goes beyond than VVDI in function, connectors and vehicle coverage etc. After all, VVDI belongs to locksmith tool while VVDI2 becomes a comprehensive locksmith device.
VVDI2 Key Programmer – VAG software:
VAG software support VAG cars: VW, Audi, Seat, Skoda, 4 th immobilizer Porsche, 4 th immobilizer Bentley .
Mainly include: Diagnostic, 4 th immobilizer, 5 th immobilizer, key learn, BCM remote control, Engine control unit, Kline instrument and immobox, adapt unit, component protection,dump tool etc.ou can find detail in VVDI2 – VAG User Manual
VVDI2 Key Programmer – BWM software
BMW software support cars: BMW. Support types can be find in Mainly function: Read/Write EWS, read CAS information，Read/Write CAS EEPROM,
Read/Write KM stored in CAS, synchronization DME with CAS, synchronization CAS with ELV, Key Learn(immo)，File Make Key, Unlock Key, File Change KM, CAS Repair etc OBD Flash ISTA version only need 10 minutes. (No extra power. No backup CAS EEPROM and FLASH).
VVDI2 – Transponder Programmer software
Transponder programmer software is a multifunctional immo transponder tool. Mainly include: transponder programming, special transponder, immobilizer data tool, other key data, prepare remote etc.